Cisco 927 security router with VDSL/ADS+ Annex M, 1.2 kg
Cisco C927-4PM. Networking standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, interface type: , Cabling technology: Base-T(X). Routing protocols: BGP, EIGRP, OSPF. Security algorithms: 3DES, 128-bit AES, 192-bit AES, 256-bit AES, DES, SSL/TLS. Flash memory: 2048 MB, Internal memory: 1024 MB, Internal memory type: DRAM. Product colour:
The Cisco 900 Series ISRs deliver integrated security and threat defense, protecting networks from both known and new Internet vulnerabilities and attacks. These powerful, fixed-configuration routers provide secure broadband and Metro and wireless LTE WAN connectivity. Service providers offering both and wireless LTE WAN services can deploy them in customer locations as CPE. Centralized and remote management capabilities are available through web-based tools and Cisco IOS® Software for full visibility and control of network configurations at the remote site.
The 900 Series ISRs simplify the deployment of WAN services, with end-to-end Operations, Administration, and Maintenance (OA&M), Service-Level Agreement (SLA) monitoring and verification, and configuration management.
The Cisco 900 Series ISRs come with a 4-port switch, providing LAN ports to connect multiple devices.
| Weight | 3 kg |
|---|---|
| Plug and Play | Yes |
| Product Condition | New Retail |
| Flash memory | 2048 MB |
| Internal memory | 1024 MB |
| pa_i_ethernetlanrj4_2312_1 | 4 |
| Weight | 1.2 kg |
| Power consumption (typical) | 30 W |
| Operating altitude | 0 – 3000 m |
| Storage relative humidity (H-H) | 5 – 95% |
| Operating relative humidity (H-H) | 5 – 95% |
| Operating temperature (T-T) | 0 – 45 °C |
| Storage temperature (T-T) | -40 – 70 °C |
| Non-operating altitude | 0 – 4570 m |
| Routing protocols | BGP, EIGRP, OSPF |
| Number of users | 50 user(s) |
| Product colour | Black |
| Security algorithms | 3DES, 128-bit AES, 192-bit AES, 256-bit AES, DES, SSL/TLS |
| MAC address filtering | Yes |
| Networking standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x |
| Safety | IEC 60950-1, UL 60950-1, CAN/CSA C22.2 No. 60950-1, EN 60950-1, AS/NZS 60950.1 |
| LED indicators | Yes |
| Quality of Service (QoS) support | Yes |
| Ethernet LAN data rates | 10,100,1000 Mbit/s |
| Cabling technology | 10/100/1000Base-T(X) |
| Depth | 177.8 mm |
| Height | 28 mm |
| Width | 259.1 mm |
| AC input frequency | 50 – 60 Hz |
| AC input voltage | 100 – 240 V |
| USB version | 2.0 |
| USB ports quantity | 1 |
| Firewall | Yes |
| Power source type | AC |
| Output voltage | 12 V |
| Auto MDI/MDI-X | Yes |
| Network address translation (NAT) | Yes |
| Traffic control | Yes |
| Internal memory type | DRAM |
| Multicast support | Yes |
| Policy-based routing | Yes |
| VLAN support | Yes |
| Differentiated services (DiffServ) supported | Yes |
| Access Control List (ACL) | Yes |
| ADSL2+ | Yes |
| VDSL2 | Yes |
| Ethernet interface type | Gigabit Ethernet |
| Harmonized System (HS) code | 85176990 |
Below you’ll find alternative models, suitable software and services that pair with this solution – helping you to avoid compatibility issues, reduce support overhead and deploy with confidence.
Not all deployments fit standard configurations. If you’re weighing up options or want a second opinion on your setup, our team is here to help with honest, straightforward advice backed by decades of vendor knowledge.
