Aruba 6000 48G Class4 4SFP 370W Switch
HPE Aruba 6000 48G Class4 4SFP 370W. Switch type: , Switch layer: . Basic switching RJ-45 ports type: , Basic switching RJ-45 ports quantity: 48, Console port: USB. MAC address table: 8192 entries, Switching capacity: 104 Gbit/s. Networking standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.3, IEEE 802.3ab, IEEE…. . Rack mounting, Form factor:
The Aruba CX 6000 Switch Series is modern family of entry level access switches ideal for branch offices, midsize businesses, and small enterprises. Designed for reliable, simple, and security-enhanced access, the Aruba CX 6000 series provides a convenient and cost-effective wired access solution for networks supporting IoT, mobile, and cloud applications.
The Aruba CX 6000 series is based on the Aruba ASIC architecture with the programmable AOS-CX operating system used across the entire Aruba CX portfolio for a more consistent, more efficient operator experience. This fully- series has convenient built-in uplinks with up to 370W of Class 4 to support IoT devices such as security cameras and wireless APs. A compact and fanless model is ideal for use in quiet, small work spaces. The Aruba CX 6000 series is easy to deploy and use with flexible management choices, allowing the best fit for your business and network environment.
Features
Entry Level Aruba CX Access Layer Switches
– The Aruba CX 6000 Switch Series offers connectivity and optional to provide entry level, reliable, and convenient wired access connectivity for enterprise branch offices and SMB networks.
– Using Aruba AOS-CX operating system across Aruba CX switching platforms and access-to-core-to-data center deployment domains provides a simpler, more consistent operator experience.
– Fully- enterprise class switches deliver Layer 2 capabilities with support static routing, ACLs, robust QoS, traffic prioritization, sFlow, and IPv6 support.
– Right size deployment with choice of 12, 24, and 48 port models with convenient built-in 1GbE uplinks and up to 370W of Class 4 .
– Simplifies ownership with no switch software licensing or subscriptions required.
Performance and Power
– The Aruba CX 6000 Switch Series is designed with Aruba ASICs that deliver very low latency, increased packet buffering, and adaptive power consumption.
– Deploy wireless access points and IoT devices with Aruba CX 6000 switch models that support up to 370W IEEE 802.3at Class 4 for up to 30W per port.
– Up to four built-in wire speed 1GbE uplinks remove bottlenecks at the access layer where users and devices connect.
Simplified Configuration and Management
– The Aruba CX 6000 Switch Series provides flexibility to manage and simplify configurations with Aruba NetEdit, easy to use Web GUI, or industry standard CLI.
– Aruba NetEdit introduces automation that allows for rapid network-wide changes, and verifies policy conformance post network updates.
– Software-defined ready with REST APIs for fine-grained programmability of network tasks.
– Reduce manual IT operation tasks around initial deployment or on-going configuration changes to accommodate adds, moves, and changes with colorless ports using local user roles and local-MAC-Authentication (LMA).
| Weight | 3 kg |
|---|---|
| Processor frequency | 1016 MHz |
| Product Condition | New Retail |
| Memory type | DDR3-SDRAM |
| Flash memory | 16384 MB |
| Internal memory | 8192 MB |
| Form factor | 1U |
| Weight | 5 kg |
| Storage relative humidity (H-H) | 15 – 90% |
| Operating temperature (T-T) | 0 – 45 °C |
| Operating relative humidity (H-H) | 15 – 95% |
| Storage temperature (T-T) | -40 – 70 °C |
| Port mirroring | Yes |
| Link aggregation | Yes |
| Flow control support | Yes |
| Auto MDI/MDI-X | Yes |
| Jumbo frames support | Yes |
| Spanning tree protocol | Yes |
| IGMP snooping | Yes |
| Switching capacity | 104 Gbit/s |
| Access Control List (ACL) | Yes |
| Quality of Service (QoS) support | Yes |
| Multicast support | Yes |
| Web-based management | Yes |
| Switch layer | L3 |
| Switch type | Managed |
| 10G support | No |
| Networking standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3x |
| Console port | USB |
| VLAN support | Yes |
| AC input frequency | 50 – 60 Hz |
| AC input voltage | 100 – 240 V |
| Depth | 305 mm |
| Height | 44 mm |
| Width | 442 mm |
| Packet buffer memory | 12.38 MB |
| Latency (1 Gbps) | 1.9 µs |
| Throughput | 77.3 Mpps |
| Total Power over Ethernet (PoE) budget | 370 W |
| Power supply included | Yes |
| Authentication | MAC-based authentication |
| SFP module slots quantity | 4 |
| IPv4 FIB entries | 256 |
| IPv6 FIB entries | 128 |
| Processor model | ARM Cortex-A9 |
| Built-in processor | Yes |
| DHCP features | DHCP client |
| IPv4 & IPv6 features | IPv4/IPv6 access-control list (ACL) |
| Harmonized System (HS) code | 85176990 |
| Cloud-managed | Yes |
| Power source | AC |
Below you’ll find alternative models, suitable software and services that pair with this solution – helping you to avoid compatibility issues, reduce support overhead and deploy with confidence.
Not all deployments fit standard configurations. If you’re weighing up options or want a second opinion on your setup, our team is here to help with honest, straightforward advice backed by decades of vendor knowledge.
