BASE-T, ++, SFP+, USB, RS232, RJ45, 2U, 440 x 86.4 x 350 mm, 10.28 Kg
Netgear M4250-40G8XF-++. Switch type: , Switch layer: /. Basic switching RJ-45 ports type: , Basic switching RJ-45 ports quantity: 40, USB 2.0 ports quantity: 1. MAC address table: 16000 entries, Switching capacity: 240 Gbit/s. Networking standards: IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt. . Rack mounting, Form factor: 2U
Pre-configured for out-of-the-box use
Netgear IGMP Plus™ enables instant multicast functionality for most AV over IP installations
Dedicated AV web-based GUI interface
Unique interface designed for the AV professional with color-coded, port-based profiles
Profiles for common audio protocols
Quickly assign profiles to ports for Dante, AES67, and AVB audio configurations. AVB Requires a separate license
Video profiles built-in
Special profiles for NVX, SVSI, Q-SYS and Dante video profiles can be easily assigned to ports as needed
Unique Automatic Configuration
Auto-trunk and auto-lag functionality automatically configures other M4250 switches for use in star topology.
Easier configuration with new AV GUI
The AV-oriented, web-based GUI permits factory or user-specified profiles to be assigned to individual ports as needed.
Use in noise-sensitive environments
Adjustable fans can be turned off if certain conditions are met. Even the default Quiet mode is quieter than most other switches.
Get up and running with little engineering time required
Our Netgear IGMP PlusTM feature is set from the factory to ensure out-of-the-box functionality for most AV over IP installations
Multiple mounting options provide ultimate flexibility
Threaded mounting holes sized to industry standards are built into the chassis for mounting behind a display or clamped to a truss.
M4250 AV Line Switches
An entirely new series of switches developed and engineered for the growing AV over IP market.
| Cables included | LAN (RJ-45), USB Type-C |
|---|---|
| pa_built-in-camera | 2U |
| Weight | 10.3 kg |
| Power consumption (typical) | 912 W |
| Heat dissipation | 3113.57 BTU/h |
| Jumbo frames support | Yes |
| Product colour | Black |
| Noise level | 60 dB |
| Switching capacity | 240 Gbit/s |
| Switch layer | L2/L3 |
| Switch type | Managed |
| 10G support | Yes |
| Networking standards | IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt |
| USB 2.0 ports quantity | 1 |
| Depth | 86.4 mm |
| Height | 350 mm |
| Width | 440 mm |
| User guide | Yes |
| Latency (1 Gbps) | 2.78 µs |
| Latency (10 Gbps) | 0.73 µs |
| Throughput | 178.56 Mpps |
| Total Power over Ethernet (PoE) budget | 2880 W |
| Power over Ethernet plus (PoE+) ports quantity | 40 |
| Power supply included | Yes |
| Rack mount kit | Yes |
| SFP+ module slots quantity | 8 |
| Harmonized System (HS) code | 85176990 |
| Power over Ethernet (PoE) type supported | Active PoE |
| Fanless | Yes |
| Rack rails | Yes |
Below you’ll find alternative models, suitable software and services that pair with this solution – helping you to avoid compatibility issues, reduce support overhead and deploy with confidence.
Not all deployments fit standard configurations. If you’re weighing up options or want a second opinion on your setup, our team is here to help with honest, straightforward advice backed by decades of vendor knowledge.
