Ruckus ICX 7850 with 48x 1/10GbE SFP+ and 8x 40/100 QSFP28 ports, 2 AC power supplies and 5 fans included, front to back airflow, MACsec
Ruckus Wireless ICX7850-48FS-E2. Switch type: , Switch layer: /. Basic switching RJ-45 ports type: None, Console port: USB. Full duplex. MAC address table: 98304 entries, Switching capacity: 2560 Gbit/s. Networking standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE…. Rack mounting, Form factor:
High Performance Core Switches for Next Generation 100G Campus
New user demands and technology advances are increasingly putting pressure on campus networks requiring them to scale to support more devices and deliver more bandwidth. The rapid growth in wireless traffic, accelerated by the adoption of 802.11ac and 802.11ax Wi-Fi, is propelling the migration from 1GbE to Multi at the access and, driving the need for er networks at the aggregation and core.
Premium Core/Aggregation Switching
– Network core layer can be distributed across the campus, deploying ports and switching capacity where they are needed.
– The performance, scalability, and availability of a high-end enterprise-class chassis.
– The deployment flexibility of fixed form factor switches
40GbE and 100GbE for Maximum Performance
– Up to 32x 40/100 GbE ports per switch.
– Up to 8x 100 GbE stacking ports, 1.6 Tbps of stacking bandwidth per switch.
– Deliver the performance and scalability required by future generations of wireless access points, IoT and LTE devices.
Highly Resilient Core Switching
– Redundant, hot-swappable power supplies and fans
– In-Service Software Upgrades (ISSU)
– Multi-Chassis Trunking (MCT) for core failover with load-balancing
– Hitless stack insertion and removal
Market-leading Stacking Scalability
– Up to 12 switches per stack
– Up to 10 km using standard optics or cables
– Up to 8x 40/100GbE standard QSFP28 stacking ports
Advanced Routing Delivers Design Flexibility
– IPv4 and IPv6
– BGP, OSPF, VRRP, PIM, PBR, VRF
Data Center Leaf/Spine Deployment with 25 & 100 GbE
– Up to 48x 10/25GbE port per leaf switch for server connectivity
– Up to 32x 40/100 GbE ports per spine switch Security and Data Privacy
– MACsec 128-bit and 256-bit data encryption ensures compliance and data confidentiality
Full specifications for this model are listed below.
| Flash memory | 32768 MB |
|---|---|
| Internal memory | 4096 MB |
| Form factor | 1U |
| Redundant power supply (RPS) support | Yes |
| Power consumption (typical) | 336.5 W |
| Heat dissipation | 1149 BTU/h |
| Operating altitude | 0 – 3000 m |
| Storage relative humidity (H-H) | 10 – 90% |
| Operating temperature (T-T) | 0 – 40 °C |
| Operating relative humidity (H-H) | 10 – 90% |
| Storage temperature (T-T) | -40 – 70 °C |
| Non-operating altitude | 0 – 12000 m |
| Mean time between failures (MTBF) | 298215 h |
| Number of VLANs | 4096 |
| Broadcast storm control | Yes |
| Port mirroring | Yes |
| Link aggregation | Yes |
| Flow control support | Yes |
| Auto MDI/MDI-X | Yes |
| Jumbo frames support | Yes |
| Spanning tree protocol | Yes |
| Rate limiting | Yes |
| IGMP snooping | Yes |
| Product colour | Black |
| Noise level | 50.3 dB |
| Switching capacity | 2560 Gbit/s |
| Full duplex | Yes |
| MAC address filtering | Yes |
| Access Control List (ACL) | Yes |
| LED indicators | Yes |
| Quality of Service (QoS) support | Yes |
| Multicast support | Yes |
| Web-based management | Yes |
| Switch layer | L2/L3 |
| Switch type | Managed |
| 10G support | Yes |
| Number of power supply units | 2 |
| Networking standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ba, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
| Console port | USB |
| VLAN support | Yes |
| AC input frequency | 50 – 60 Hz |
| AC input voltage | 100 – 240 V |
| Depth | 444.5 mm |
| Height | 44 mm |
| Width | 440 mm |
| Physical stacking (units) | 12 |
| Power consumption (max) | 443.1 W |
| Power supply included | Yes |
| Jumbo frames | 9216 |
| ARP inspection | Yes |
| SFP+ module slots quantity | 48 |
| Forwarding rate | 1900 Mpps |
| IGMP proxy | Yes |
| Number of fans | 5 fan(s) |
| DHCP features | DHCP relay, DHCP server, DHCP snooping |
| QSFP28 ports quantity | 8 |
Our specialists are here to help assess compatibility, compare suitable alternatives, or talk through your configuration needs before committing to a solution.
Contact us today for a no-obligation chat.
Below you’ll find alternative models, suitable software and services that pair with this solution – helping you to avoid compatibility issues, reduce support overhead and deploy with confidence.
Not all deployments fit standard configurations. If you’re weighing up options or want a second opinion on your setup, our team is here to help with honest, straightforward advice backed by decades of vendor knowledge.