SuperStorage Server, Dual socket R3 (LGA 2011), 16x DIMM slots, 16x 3.5″ Hot-swap SAS3/SATA3, AMI BIOS
Supermicro 6038R-E1CR16L. Motherboard chipset: Intel® C612, Processor socket: LGA 2011 (Socket R), Processor family: Intel. Supported memory types: DDR4-SDRAM, Supported DIMM module capacities: 4GB, 8GB, 16GB, 32GB, 64GB, Maximum internal memory: 2000 GB. Storage drive sizes supported: 2.5,3.5″, Supported storage drive interfaces: Serial Attached SCSI (SAS)-3, Serial ATA III, Storage controller: LSI SAS3008. On-board graphics card model: Aspeed AST2400. Ethernet interface type: Fast Ethernet, Gigabit Ethernet, Ethernet LAN data rates: 10,100,1000 Mbit/s, Copper ethernet cabling technology: 10BASE-T, 100BASE-TX, 1000BASE-T
– Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v3 family; QPI up to 9.6GT/s
– Up to 1TB ECC DDR4 2133MHz; 16x DIMM slots
– 1 PCI-E 3.0 x16, 3 PCI-E 3.0 x8 (slot 3 & 4 occupied by controller and JBOD expansion port)
– Dual 10GBase-T LAN w/ Intel® X540
– 16x 3.5″ Hot-swap SAS3/SATA3 drive bays; 2x 2.5″ optional Hot-swap drive bays (rear)
– SAS3 via LSI 3008 controller; IT mode
– Server remote management: IPMI 2.0 / KVM over LAN / Media over LAN
– 2x 80mm hot-swap rear exhaust PWM fans
– 920W Redundant Power Supplies Platinum Level (94%)
| BIOS memory size | 16 Mbit |
|---|---|
| BIOS type | AMI |
| Compatible processor series | Intel® Xeon® |
| Processor family | Intel |
| Processor socket | LGA 2011 (Socket R) |
| Hot-swap hard drive bays | Yes |
| ECC | Yes |
| Maximum internal memory | 2000 GB |
| Number of DIMM slots | 16 |
| pa_i_ethernetlanrj4_2312_1 | 2 |
| USB 2.0 ports quantity | 2 |
| VGA (D-Sub) ports quantity | 1 |
| Depth | 648 mm |
| Height | 132 mm |
| Weight | 21.8 kg |
| Width | 437 mm |
| Redundant power supply (RPS) support | Yes |
| Power supply | 920 W |
| Storage relative humidity (H-H) | 5 – 95% |
| Operating temperature (T-T) | 10 – 35 °C |
| Operating relative humidity (H-H) | 8 – 90% |
| Storage temperature (T-T) | -40 – 70 °C |
| LAN controller | Intel® X540, Realtek RTL8201N |
| Product colour | Black |
| RAID levels | 0, 1, 5, 10 |
| LED indicators | HDD, Network, Power, Power fail |
| PCI Express x16 slots | 1 |
| PCI Express x8 slots | 3 |
| Memory voltage | 1.2 V |
| Number of processors supported | 2 |
| System bus rate | 9.6 GT/s |
| Intel Xeon series | E5-2600 |
| Motherboard chipset | Intel® C612 |
| Memory form factor | 288-pin DIMM |
| Supported RDIMM clock speeds | 2400,1600,1866,2133 MHz |
| Supported memory types | DDR4-SDRAM |
| Supported DIMM module capacities | 4GB, 8GB, 16GB, 32GB, 64GB |
| Maximum RDIMM memory | 512 GB |
| IPMI LAN (RJ-45) port | Yes |
| Copper ethernet cabling technology | 10BASE-T, 100BASE-TX, 1000BASE-T |
| Ethernet LAN data rates | 10,100,1000 Mbit/s |
| Intelligent Platform Management Interface (IPMI) support | Yes |
| PCI Express slots version | 3.0 |
| Chassis type | Rack (3U) |
| Backplanes support | Yes |
| Redundant fans support | Yes |
| Ethernet LAN | Yes |
| Rack-Friendly board | Yes |
| On-board graphics card model | Aspeed AST2400 |
| Fan diameter | 8 cm |
| On/off switch | Yes |
| Certification | 80 PLUS Platinum |
| Number of fans | 2 fan(s) |
| System bus type | QuickPath Interconnect (QPI) |
| Maximum cache | 55 MB |
| Memory bus | 72 bit |
| DC output current (+12 V) | 75 A |
| Input current | 11 – 4.5 A |
| BIOS features | APM 1.2, PCI 2.2, Plug & Play, SMBIOS 2.3, UEFI |
| AC input frequency | 50 – 60 Hz |
| AC input voltage | 100 – 240 V |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 2 |
| Number of storage drives supported | 16 |
| Supported storage drive interfaces | Serial Attached SCSI (SAS)-3, Serial ATA III |
| ACPI version | 2.0 |
| Storage drive sizes supported | 2.5,3.5" |
| Harmonized System (HS) code | 84714100 |
| Ethernet interface type | Fast Ethernet, Gigabit Ethernet |
| Storage controller | LSI SAS3008 |
| Sustainability certificates | RoHS |
Below you’ll find alternative models, suitable software and services that pair with this solution – helping you to avoid compatibility issues, reduce support overhead and deploy with confidence.
Not all deployments fit standard configurations. If you’re weighing up options or want a second opinion on your setup, our team is here to help with honest, straightforward advice backed by decades of vendor knowledge.
