Supermicro SSG-2029P-ACR24H, LGA 3647 (Socket P), Intel® Xeon®, 10.4 GT/s, Intel® Xeon®, DDR4-SDRAM, 2048 GB
Supermicro SSG-2029P-ACR24H. Processor socket: LGA 3647 (Socket P), Processor family: Intel® Xeon®, System bus rate: 10.4 GT/s. Supported memory types: DDR4-SDRAM, Maximum internal memory: 2048 GB, Maximum RDIMM memory: 2048 GB. Storage drive sizes supported: 2.5″, Supported storage drive interfaces: Serial Attached SCSI (SAS)-3, Serial ATA III. On-board graphics card model: Aspeed AST2500. Ethernet interface type: 10 Gigabit Ethernet, Ethernet LAN data rates: 10000 Mbit/s, LAN controller: Intel® X557, Intel® X722
| BIOS memory size | 32 Mbit |
|---|---|
| BIOS type | UEFI AMI |
| Compatible processor series | Intel® Xeon® |
| Processor family | Intel® Xeon® |
| Processor socket | LGA 3647 (Socket P) |
| Hot-swap hard drive bays | Yes |
| ECC | Yes |
| Maximum internal memory | 2048 GB |
| Number of DIMM slots | 16 |
| pa_i_ethernetlanrj4_2312_1 | 3 |
| Serial ports quantity | 1 |
| VGA (D-Sub) ports quantity | 1 |
| Depth | 630 mm |
| Height | 89 mm |
| Width | 437 mm |
| Redundant power supply (RPS) support | Yes |
| Power supply | 1200 W |
| Storage relative humidity (H-H) | 5 – 95% |
| Operating temperature (T-T) | 10 – 35 °C |
| Operating relative humidity (H-H) | 8 – 90% |
| Storage temperature (T-T) | -40 – 60 °C |
| LAN controller | Intel® X557, Intel® X722 |
| Product colour | Black |
| RAID levels | 0,1,5,6,10,50,60 |
| LED indicators | Yes |
| Memory voltage | 1.2 V |
| Number of processors supported | 2 |
| System bus rate | 10.4 GT/s |
| Supported RDIMM clock speeds | 2133,2400,2666 MHz |
| Supported memory types | DDR4-SDRAM |
| Maximum RDIMM memory | 2048 GB |
| IPMI LAN (RJ-45) port | Yes |
| Ethernet LAN data rates | 10000 Mbit/s |
| PC health monitoring | CPU, Fan, Temperature, Voltage |
| Intelligent Platform Management Interface (IPMI) support | Yes |
| Chassis type | Rack (2U) |
| Ethernet LAN | Yes |
| On-board graphics card model | Aspeed AST2500 |
| Number of redundant power supplies supported | 2 |
| Number of redundant power supplies installed | 2 |
| Fan diameter | 8 cm |
| On/off switch | Yes |
| Number of fans | 3 fan(s) |
| DC output current (+12 V) | 100 A |
| AC input frequency | 50 – 60 Hz |
| AC input voltage | 100 – 240 V |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 5 |
| PCI Express x16 (Gen 3.x) slots | 3 |
| PCI Express x8 (Gen 3.x) slots | 4 |
| Number of 2.5" bays | 24 |
| Number of storage drives supported | 24 |
| Supported storage drive interfaces | Serial Attached SCSI (SAS)-3, Serial ATA III |
| Package weight | 27.7 kg |
| 80 PLUS certification | 80 PLUS Titanium |
| Storage drive sizes supported | 2.5" |
| Ethernet interface type | 10 Gigabit Ethernet |
| Sustainability certificates | RoHS |
Below you’ll find alternative models, suitable software and services that pair with this solution – helping you to avoid compatibility issues, reduce support overhead and deploy with confidence.
Not all deployments fit standard configurations. If you’re weighing up options or want a second opinion on your setup, our team is here to help with honest, straightforward advice backed by decades of vendor knowledge.
