2x LGA 2011, 16x 240-pin DIMM, Intel C602, 8x 2.5″ Hot-swap SATA, 1x PCI-E 3.0 (x16), 1x PCI-E 3.0 (x8), IPMI, 1280W
Supermicro SuperServer 2027PR-DTTR. Motherboard chipset: Intel® C602, Processor socket: LGA 2011 (Socket R), System bus rate: 8 GT/s. Supported memory types: DDR3-SDRAM, Supported DIMM module capacities: 1GB, 2GB, 4GB, 8GB, 16GB, 32GB, Maximum internal memory: 1000 GB. Storage drive sizes supported: 3.5″, Supported storage drive interfaces: Serial Attached SCSI (SAS)-2, Serial ATA III, RAID levels: 0, 1, 5, 10. Ethernet interface type: Fast Ethernet, Gigabit Ethernet, Ethernet LAN data rates: 10,100,1000 Mbit/s, Copper ethernet cabling technology: 10GBASE-T, 100BASE-TX, 1000BASE-T. BIOS type: AMI, BIOS memory size: 16 Mbit, BIOS features: APM 1.2, PCI 2.2, Plug & Play, SMBIOS 2.3, UEFI
Two hot-pluggable systems (nodes) in a 2U form factor.
| BIOS memory size | 16 Mbit |
|---|---|
| BIOS type | AMI |
| Compatible processor series | Intel® Xeon® |
| Processor socket | LGA 2011 (Socket R) |
| Hot-swap hard drive bays | Yes |
| ECC | Yes |
| Maximum internal memory | 1000 GB |
| Number of DIMM slots | 16 |
| pa_i_ethernetlanrj4_2312_1 | 4 |
| USB 2.0 ports quantity | 9 |
| VGA (D-Sub) ports quantity | 1 |
| Depth | 889 mm |
| Height | 178 mm |
| Weight | 30.4 kg |
| Width | 437 mm |
| Power supply | 2000 W |
| Storage relative humidity (H-H) | 5 – 95% |
| Operating temperature (T-T) | 10 – 35 °C |
| Operating relative humidity (H-H) | 8 – 90% |
| Storage temperature (T-T) | -40 – 70 °C |
| Product colour | Black |
| RAID levels | 0, 1, 5, 10 |
| PCI Express x8 slots | 4 |
| Memory voltage | 1.35,1.5 V |
| Number of processors supported | 2 |
| System bus rate | 8 GT/s |
| Motherboard chipset | Intel® C602 |
| Memory form factor | 240-pin DIMM |
| Supported RDIMM clock speeds | 800,1066,1333,1600,1866 MHz |
| Supported memory types | DDR3-SDRAM |
| Supported UDIMM clock speeds | 800,1066,1333,1600,1866 MHz |
| Supported DIMM module capacities | 1GB, 2GB, 4GB, 8GB, 16GB, 32GB |
| Maximum UDIMM memory | 128 GB |
| Maximum RDIMM memory | 512 GB |
| IPMI LAN (RJ-45) port | Yes |
| Copper ethernet cabling technology | 10GBASE-T, 100BASE-TX, 1000BASE-T |
| Ethernet LAN data rates | 10,100,1000 Mbit/s |
| PCI Express slots version | 3.0 |
| Chassis type | Rack (2U) |
| Redundant fans support | Yes |
| Ethernet LAN | Yes |
| Number of redundant power supplies installed | 1 |
| Fan diameter | 9 cm |
| On/off switch | Yes |
| Number of fans | 7 fan(s) |
| System bus type | QuickPath Interconnect (QPI) |
| Maximum cache | 30 MB |
| Number of SATA II connectors | 4 |
| Number of SATA III connectors | 2 |
| DC output current (+5 V) | 4 A |
| BIOS features | APM 1.2, PCI 2.2, Plug & Play, SMBIOS 2.3, UEFI |
| AC input frequency | 50 – 60 Hz |
| AC input voltage | 100 – 240 V |
| Number of storage drives supported | 72 |
| Supported storage drive interfaces | Serial Attached SCSI (SAS)-2, Serial ATA III |
| Package weight | 47.2 kg |
| System Management BIOS (SMBIOS) version | 2.3 |
| Plug and Play | Yes |
| Storage drive sizes supported | 3.5" |
| Ethernet interface type | Fast Ethernet, Gigabit Ethernet |
| Number of SAS ports | 8 |
| Sustainability certificates | RoHS |
Below you’ll find alternative models, suitable software and services that pair with this solution – helping you to avoid compatibility issues, reduce support overhead and deploy with confidence.
Not all deployments fit standard configurations. If you’re weighing up options or want a second opinion on your setup, our team is here to help with honest, straightforward advice backed by decades of vendor knowledge.
